What glue does the kitchen sink make not mildew

Kitchen sink glass glue will not mold.
Glass glue is a commonly used adhesive, mainly used for the bonding and sealing of glass and other materials.

It is usually divided into acidic and neutral two categories, neutral model connection performance is general, suitable for home improvement, such as bathroom, mirror back and other places do not need strong bonding performance, because it will not erode the object; Acidic models are often used where excellent bonding is needed, such as the back of wood wire. Treating the edge of the sink with glass glue can reduce the probability of mold, while acting as a waterproof seal.

However, even if the use of waterproof, mildew resistant glass glue, can not completely avoid mildew phenomenon. Therefore, before the use of glass glue, the surface of the bonding substrate should be cleaned to ensure that there is no dust and other attachments to avoid poor adhesion after curing. In addition, ventilation should be maintained after construction, and glass glue should be avoided in areas with water or long immersion, because these areas are more likely to lead to mold. If the sealant is moldy, you can use mold remover or disinfectant to clean it, but be careful not to use a steel brush to clean it, so as not to cause rust or scratches. If the mold is serious, you need to remove the old sealant and re-seal.