When choosing a faucet style suitable for a kitchen sink, it is necessary to comprehensively consider multiple dimensions such as the size of the sink, usage habits, functional requirements, installation conditions, and decoration style. The following are specific suggestions:
1. Select the water outlet method based on the size and layout of the water tank
Large single slot/double slot (depth > 20cm)
Give priority to choosing pull-down faucets:
Equipped with a stretchable hose and a multi-angle rotating nozzle, it can reach deep into the sink to rinse cookware, dead corners, and even pull out the sink to clean the countertop. For instance, when the sink is deep, the high-curved neckline of the pull-down faucet can prevent water from splashing out, making it suitable for cleaning tall bottles, jars or large cookware.
Sub-selective faucet
The hose has a relatively short stretch length (usually 15-30cm), making it suitable for medium-depth sinks. It is sufficient for daily dishwashing, but when cleaning tall objects, it may be necessary to tilt the items in the sink.
Small single trough/shallow trough (depth < 15cm)
Split spray type or ordinary fixed type faucet:
The split spray type can switch between “columnar water flow” (for water collection) and “spray water flow” (for flushing) through a button, suitable for precise operation in small Spaces. Fixed faucets offer high cost performance, but they have single functions and are suitable for scenarios with limited budgets or those who are accustomed to using basins to catch water.
Second, select the control mode based on usage habits
Pursue convenience (frequent one-handed operation)
Choose a single-handle faucet:
One handle synchronously controls the water temperature and flow rate, which is suitable for turning on and off the water and adjusting the water volume with one hand when cooking (such as quickly filling with water or temporarily turning off the heat), but the accuracy of water temperature adjustment is relatively low and may require multiple fine-tuning.
Avoid double-handled faucets:
It requires both hands to adjust the hot and cold water separately. It is inconvenient to operate when the kitchen is busy. It is suitable for scenarios that are sensitive to water temperature (such as preparing milk powder) but do not pursue efficiency.
Pay attention to precise control of water temperature
Select a thermostatic faucet:
It is equipped with a built-in temperature control valve core that can lock the ideal water temperature (such as 38℃), avoiding sudden changes in temperature. It is especially suitable for families with the elderly or children, reducing the risk of scalding.
Paired with a double-handled faucet (advanced option) :
If the budget is sufficient, a double-handle + thermostatic valve core combination can be installed to achieve precise temperature control and convenience.
Iii. Select additional configurations based on functional requirements
High-frequency cleaning requirements (fruit and vegetable/tableware rinsing)
A must-have faucet with a foaming device or spray function:
The bubble generator can reduce water splashing (the bubble water flow is gentle), and the spray mode is suitable for powerful stain rinsing. Some high-end faucets support “pulse water flow”, which has a stronger cleaning power.
Optional pull-out faucet + magnetic base:
After being stretched, the hose can be fixed by magnetic attraction to prevent it from sagging after use and keep the countertop clean.
Demand for direct drinking water or scenarios with multiple water sources
Select dual faucets:
One way is connected to tap water (for cleaning), and the other to purified water (for direct drinking). There is no need to install an additional purified water faucet, saving countertop space.
Pay attention to the installation conditions: Double-hole positions should be reserved in the sink in advance, or a single-hole faucet with switchable water sources should be selected.
Iv. Select the installation method based on the installation conditions
Limited countertop space (single-hole sink)
Choose a single-handle integrated faucet:
Single-hole installation, suitable for small-sized or compact sinks, avoiding the space occupied by multiple holes.
Avoid split spray or double-handle faucets: Additional holes need to be drilled, which may exceed the countertop’s load-bearing capacity.
The walls can be renovated or pursued in a minimalist style
Choose wall-mounted faucets:
It is installed on the wall to free up countertop space and is suitable for wall sinks without wall cabinets (such as central island countertops), but water pipes need to be pre-buried in advance, resulting in high construction costs and wall demolition for maintenance.
Conventional countertop sink (with 3 holes reserved)
Choose a double-handle + shower column combination faucet:
Classic configuration, suitable for retro or American kitchen styles, with cold and hot water handles + middle shower column (for high-pressure flushing), comprehensive functions but complex installation.
V. Select the exterior design based on the decoration style
Modern minimalist/Nordic style
Choose matte black, gun gray or stainless steel brushed faucets:
With smooth lines and an anti-fingerprint coating on the surface that is easy to clean, it pairs well with rock plates or quartz stone sinks to create a simple and high-end look.
Retro/country style
Select copper antique faucets (blue bronze/red bronze color) :
Carved handle, spiral pattern water outlet, paired with ceramic or granite sink, suitable for American and French country styles.
Industrial style /loft
Choose exposed metal pipe design or black thickened faucets:
The rugged texture, paired with a stainless steel sink, enhances the cold and industrial atmosphere.
Vi. Other Precautions
Budget control
Basic single-handle faucets (200-500 yuan) < pull-out type (500- 1,500 yuan) < constant temperature/sensor type (over 1,500 yuan), choose as needed.
Material durability
Give priority to choosing faucets with a main body made of brass (with strong corrosion resistance) or 304 stainless steel (lead-free and environmentally friendly) to avoid inferior zinc alloy faucets being prone to breakage and heavy metal leaching.
Post time: May-08-2025
